Not all tanks are created alike. Many manufactures have tanks that may work for you, but buyer beware. We see tanks in our shop every day for repairs because they are too thin. Sure it will hold water or waste, but a slight freeze, try to replace a hose or just push on a hose while working on another project; and the fitting will crack free of the tank. We only sell tanks that are thick enough so you only have to do the job once. Our tanks are custom made rotational molded seemless 3/8" thick. No seems means no place to fail or leak. A true custom tank is heat welded from the outside leaving cracks on the inside. Cracks are a weak point to fail if a tank is over filled too quickly or by normall wear and tear.
If you don't find a tank below please call, fax or email us with your dimensions. We have about 1,000 molds to choose from. It is important that you give us your max dimensions so we can narrow the search to your needs.
Lets get started.
What we need from you: -The dimensions of the tank you require. (Remember to leave yourself room for fittings)
-The tanks are of a seamless construction and can be installed in any direction. -After we find a tank with as close to, if not the exact dimensions you require, we would then require a drawing of the tank with the placement of fittings. -All basic fittings are included in the price of the tank. This includes: Inlet, Outlet and Vent. -Additional cost for fittings would include: Diptube for discharge and an access port.
